One root zone, room-wide
Every block starts the same, so the program you write is the program that runs.
Our process and quality is not left to chance.
The result is a superior balance of air and water within the substrate. Blocks saturate evenly rather than channeling and dry back consistently, which is what lets you steer irrigation and EC rather than chase them, with a layer of forgiveness built in. The structure stays open through the crop, so the balance you start with is the balance you finish with.
And because the coir is washed and buffered before it reaches you, nutrients stay available to the plant instead of being held back by the media: a clean baseline, every block.
Tighter tolerances, block to block. Every detail is designed on purpose.
Cultivation benefits
Less Labor between Crops
Faster to hydrate, less wasted water and feed, quicker to plant and the room is turning again.
Steerable, not reactive
Even hydration and consistent drybacks put irrigation, EC and the root zone under your control.
One system, any scale
Same buffering, same tolerances, one room or forty.
1 Gallon
Compressed block, pre-drilled for drip stakes and propagation.
- SKU NC1GALP
- Compressed 5.7 × 5.7 × 1.1 in
- Expanded 6 × 6 × 6 in
- Expanded volume 0.94 gal / 3.54 L
2 Gallon
Compressed block, pre-drilled for drip stakes and propagation.
- SKU NC2GALP
- Compressed 6.7 × 6.7 × 1.6 in
- Expanded 7 × 7 × 7.5 in
- Expanded volume 1.6 gal / 6.0 L
Physical Properties
| Property | Specification |
|---|---|
| Material | 100% washed & buffered coconut coir |
| Total porosity | 90–95% |
| Water holding capacity | 60–65% |
| EC | < 0.5 mS/cm |
| pH range | 6.0–7.0 |
Precision features, built in
Purchase NOVACOIR 1 Gallon Now
01
Tight-fit drip stake holes
Two holes placed diagonally, sized to hold drip stakes snug and centered.
02
Husk that holds water
The husk and processing behind NOVACOIR's water/air balance also means less runoff at the drip point.
03
Mesh debris bag
A mesh insert keeps fine particulates out of the line, less risk of clogging.
04
Center propagation plug hole
A centered hole, ready for a clone or seedling drop-in without extra prep.
05
Optimal sensor placement reference point
A printed reference line and marked holes show exactly where to place moisture and EC sensors so consistent placement, comparable readings, block to block.
